Loading ...
Loading ...
Loading ...
31
⚫ SD Card Error
When there are some errors in writing SD card, the corresponding alarms will be triggered.
1. Go to Config→Alarm→Exception Alarm→SD Card Error as shown below.
2. Click “Enable”.
3. Set the alarm holding time and alarm trigger options. Trigger alarm out, Email and
FTP. The setup steps are the same as motion detection. Please refer to 5.3.1 Motion
Detection for details.
⚫ IP Address Collision
1. Go to Config→Alarm→Exception Alarm→IP Address Collision as shown below.
2. Click “Enable” and set the alarm holding time.
3. Trigger alarm out. When the IP address of the device is in conflict with the IP address
of other devices, the system will trigger the alarm out.
⚫ Cable Disconnection
1. Go to Config→Alarm→Exception Alarm→Cable Disconnected as shown below.
2. Click “Enable” and set the alarm holding time.
3. Trigger alarm out. When the device is disconnected, the system will trigger the alarm
out.
Loading ...
Loading ...
Loading ...