Loading ...
Loading ...
Loading ...
1
Chapter 1. Introduction
Safety Instruction
About the Manual
Please read this user manual carefully to ensure that you can use the device correctly
and safely.
Within the maximum scope permitted by the law, the products described in this
Manual (including hardware, software, firmware, etc.) are provided “AS IS”. The
information in this document (including URL and other Internet site reference data) is
subject to change without notice. This Manual may contain technical incorrect places
or printing errors. This information will be periodically updated, and these changes will
be added into the latest version of this Manual without prior notice.
Use of the Product
This product should not be used for illegal purposes.
The company does not allow anyone to use the Company's products to infringe the
privacy, personal information, and portrait rights of others. The user shall not use this
product for any illegal use or any prohibited use under these terms, conditions, and
declarations. When using this product, the user shall not damage, disable, overload or
obstruct any of the hardware of this product in any way, or interfere with the use of this
product by any other users. Also, the user should not attempt to use the product or the
software, by hacking, stealing the password, or any other means.
Electrical Safety
This product is intended to be supplied by a Listed Power Unit, marked with 'Limited
Power Source', 'LPS' on unit, output rated minimum 12V/2 A or POE 48V/ 350mA or
AC24V (depending on models), no more than 2000m altitude of operation and
Tma=60 Deg.C.
As for the modes with PoE function, the function of the ITE being investigated to IEC
60950-1 standard is considered not likely to require connection to an Ethernet network
with outside plant routing, including campus environment and the ITE is to be
connected only to PoE networks without routing to the outside plant.
Improper handling and/or installation could run the risk of fire or electrical shock.
The product must be grounded to reduce the risk of electric shock.
Loading ...
Loading ...
Loading ...