Loading ...
Loading ...
Loading ...
33
Selecting Wireless Network Settings from the Control Panel
You can select or change wireless network settings using your product control panel.
To install your product on a wireless network, follow the instructions on the Start Here sheet and install
the necessary software. The installer program guides you through network setup.
Note: Breakdown or repair of this product may cause loss of network data and settings. Epson is not
responsible for backing up or recovering data and settings during or after the warranty period. We
recommend that you make your own backup or print out your network data and settings.
1. Press the home button, if necessary.
2. Press the arrow buttons to select Wi-Fi Setup, then press the OK button.
3. Press the OK button to select Wi-Fi (Recommended), then press the OK button again.
4. Press the OK button to select Wi-Fi Setup Wizard, then press the OK button again.
5. Press the arrow buttons to select the name of your wireless network and press the OK button. If you
do not see your wireless network's name, press the reset button to refresh the list. If it is still not
displayed, you can enter it manually.
Note: To enter the wireless network name manually, select Other SSIDs and press the OK button.
Loading ...
Loading ...
Loading ...