Loading ...
Loading ...
Loading ...
156
Maintenance Box Replacement
The maintenance box stores surplus ink that gets collected during printing or print head cleaning. To
prevent ink leakage from the maintenance box, the printer is designed to stop printing when the
absorbing capacity of the maintenance box has reached its limit. Whether and how often this is required
will vary according to the number of pages you print, the type of material that you print on, and the
number of cleaning cycles that the printer performs. When you see a message on the LCD screen, follow
the on-screen instructions to replace the maintenance box.
Note the following precautions when replacing the maintenance box:
• Do not remove the maintenance box or its cover except when replacing the maintenance box;
otherwise, ink may leak.
• Do not touch the areas of the maintenance box or inside the product as shown below.
• Do not tilt the maintenance box after removing it; otherwise, ink may leak.
• Do not touch the openings in the maintenance box or you may get ink on you.
• Do not drop the maintenance box or subject it to strong shocks and do not store it in high or freezing
temperatures.
• If you cannot close the maintenance box cover, make sure the maintenance box is installed properly.
• Keep the maintenance box out of direct sunlight.
• Do not replace the maintenance box during printing; otherwise, ink may leak.
• Do not disassemble the maintenance box; otherwise ink may get into your eyes or on your skin.
• Do not reuse a maintenance box that has been removed and left uninstalled for a long period of time.
Loading ...
Loading ...
Loading ...