Loading ...
Loading ...
Loading ...
168
Note: Head cleaning consumes ink and should not be performed more than necessary.
1. Make sure there are no errors on the LCD screen and the output tray is extended.
2. Load a few sheets of plain paper in the product.
3. Press the home button, if necessary.
4. Press the arrow buttons to select Maintenance, then press the OK button.
5. Select Head Cleaning and press the OK button.
6. Press the start button to clean the print head.
Caution: Never open the inner cover or turn off the product during a cleaning cycle or you may
damage it.
You see a message on the LCD screen and the power light flashes throughout the cleaning cycle.
When the cleaning cycle is finished, the power light stays on and you see a message on the LCD
screen.
7. Select Nozzle Check, press the OK button, and press the start button to run a nozzle check and
confirm that the print head is clean.
Loading ...
Loading ...
Loading ...