Loading ...
Loading ...
Loading ...
252
such devices or inside a medical facility, follow the directions from authorized staff members at the
facility, and follow all posted warnings and directions on the device to avoid causing an accident.
Do not connect this product to the internet directly. Connect it to a network protected by a router or
firewall.
Parent topic: Important Safety Instructions
Administrator Password Instructions
You can set an administrator password to prevent unauthorized access or changes to general product
settings and network settings stored in the product when connecting to a network.
The default value of the administrator password is printed on the product's label. The label is located on
the side where the cover is opened, the back, or the bottom, depending on the product.
You must enter the default administrator password when performing the following operations:
• Updating your product's firmware from a computer or smart device
• Accessing the advanced settings in Web Config
• Using applications that can change the product's settings
You can change the administrator password from the product's control panel or Web Config. The new
password must be 8 characters or more. If you restore the product to default settings (Settings >
Restore Default Settings > Clear All Data and Settings), the administrator password resets to the
product serial number.
Parent topic: Important Safety Instructions
FCC Compliance Statement
For United States Users
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio or television reception. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause interference to radio and television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
Loading ...
Loading ...
Loading ...