Panasonic AG-CX350PJ5 AG-CX350 4K Camcorder

Advanced User Guide - Page 78

For AG-CX350PJ5.

PDF File Manual, 210 pages, Read Online | Download pdf file

AG-CX350PJ5 photo
Loading ...
Loading ...
Loading ...
78
Chapter 4 Operation — Menu settings
[A.KNEE RESPONSE]
Sets the auto knee response speed. The smaller the setting value, the faster the response speed is.
The items that can be set are as follows.
f [1]…[8]
[KNEE POINT]
Sets the knee point position in 0.5% steps.
The items that can be set are as follows.
f [70.0%]…[107.0%]
[KNEE SLOPE]
Sets the knee inclination.
The items that can be set are as follows.
f [0]…[99]
[HLG KNEE SW]
Enables/disables the operation of knee for HLG.
The items that can be set are as follows.
f [ON], [OFF]
[HLG KNEE POINT]
Sets the position of the knee point for HLG.
The items that can be set are as follows.
f [55]…[100]
[HLG KNEE SLOPE]
Sets the inclination of knee for HLG.
The items that can be set are as follows.
f [0]…[100]
[WHITE CLIP SETTING]
[WHITE CLIP]
Turns the white clip function [ON]/[OFF]. The setting value of [WHITE CLIP LEVEL] is enabled when the function is [ON].
The items that can be set are as follows.
f [ON], [OFF]
[WHITE CLIP LEVEL]
Sets the white clip level.
The items that can be set are as follows.
f [90%]…[109%]
[DRS]
Enables/disables the dynamic range stretcher function.
If functions are assigned to the USER buttons, [ON]/[OFF] can be switched using the USER button operations.
The items that can be set are as follows.
f [ON], [OFF]
[DRS EFFECT DEPTH]
Sets the compression level of the high luminosity areas of the dynamic range stretcher function.
By compressing the video signal levels of the high luminosity areas that are blown out in normal shooting, the dynamic range can be expanded.
The items that can be set are as follows.
f [1]…[3]
[DNR]
Changes the noise reduction setting and adjusts the noise reduction effect.
The items that can be set are as follows.
f [OFF], [1], [2]
[A.IRIS LEVEL]
Enables/disables the auto iris level function.
If functions are assigned to the USER buttons, [ON]/[OFF] can be switched using the USER button operations.
The items that can be set are as follows.
f [ON], [OFF]
[A.IRIS LEVEL EFFECT]
Adjusts the brightness in the auto iris mode.
Increase the value to brighten, and decrease the value to darken the convergence of auto iris.
Loading ...
Loading ...
Loading ...