Panasonic AG-CX350PJ5 AG-CX350 4K Camcorder

Advanced User Guide - Page 152

For AG-CX350PJ5.

PDF File Manual, 210 pages, Read Online | Download pdf file

AG-CX350PJ5 photo
Loading ...
Loading ...
Loading ...
152
Chapter 6 Playback — Thumbnail operation
Protecting clips
The clip recorded in MOV or AVCHD can be protected.
1
Press the <THUMBNAIL> button.
The thumbnail screen is displayed.
2
Press the <MENU> button while the thumbnail screen is displayed.
The menu is displayed.
3
Select the [THUMBNAIL] menu [CLIP] [PROTECT].
4
Select [SELECT].
The thumbnail screen is displayed.
5
Select the clip to protect in the thumbnail screen.
is displayed on the selected clip.
f Protect is canceled when the protected clip is selected.
@
NOTE
t It cannot protect when the card with the clip to protect is write protected.
t The clip whose recording le format is P2 cannot be protected.
Restoring clips
In following cases, restoration of the clip may be required depending on the condition. It may take some time to restore depending on the error.
f When the memory card in the card slot that is ashing is removed while the card 1 access lamp or the card 2 access lamp is ashing
f When the power is turned off by removing the battery or the AC adaptor while recording or performing record completion process
Restoring a clip (MOV format/AVCHD format)
An error as in following gure is displayed when MOV or AVCHD is selected as the recording le format.
COPY
Fig. 1
1
Select [SET] in the error message screen. (Fig. 1)
f Once the repair is completed, select
in the conrmation message. It will return to the previous screen.
f
is displayed on the clip when an abnormal management information is detected while displaying the thumbnail.
Restoring a clip (P2 format)
An error message is not displayed when P2 is selected as the recording le format.
is displayed in the thumbnail screen when there is at least one defective P2 clip that may be repaired in the thumbnail screen. In such case, the clip
can be repaired in following procedure.
1
Press the <THUMBNAIL> button.
The thumbnail screen is displayed.
2
Press the <MENU> button while the thumbnail screen is displayed.
The menu is displayed.
3
Select the [THUMBNAIL] menu [CLIP] [REPAIR].
4
Select [YES].
All the defective P2 clips that may be repaired in the thumbnail screen are repaired.
@
NOTE
t Do not remove the memory card in the card slot that is ashing, or do not remove the battery or the AC adaptor when the card 1 access lamp/card 2
access lamp is ashing in orange. Doing so will cause damage to the memory card.
Loading ...
Loading ...
Loading ...