Panasonic AG-CX350PJ5 Advanced User Guide

Loading ...

– 189 –

Chapter 9 Network Connection — NDI|HX function

Enabling the NDI|HX function

Perform the setting for the NDI|HX function, and then enable the NDI|HX function referring to the information in the NewTek website, etc. [NDI|HX] is

displayed in the [NETWORK] menu → [NDI|HX] → [ACTIVATION] when the NDI|HX function is enabled.

฀@

NOTE

t The NDI|HX function will remain enabled once it has been set, unless the activation information saved on the camera is deleted.

t To enable the NDI|HX function of the camera using the tool from NewTek, it is necessary to select [NDI|HX] in the [NETWORK] menu → [NETWORK

FUNC].

Streaming with multicast

One streaming can be distributed to multiple NDI|HX compatible switchers via supported router, etc., when the multicast function is used.

Select the [NETWORK] menu → [NDI|HX] → [MULTICAST] → [ENABLE].

Select the [NETWORK] menu → [NDI|HX], and specify [MULTICAST ADDRESS] and [MULTICAST PORT].

f Set [MULTICAST ADDRESS] within following range.

IPv4: 224.0.1.0 to 239.255.255.254

IPv6: Multicast address starting with FF

f Set [MULTICAST PORT] within the range of 1024 to 50000.

฀@

NOTE

t One that has added + 1 to the end of the specied multicast address is also used for NDI|HX.

t Disable the LAN card not to be used when receiving the multicast video to be displayed on a computer with multiple LAN cards installed.

Using the NDI|HX function

Control the camera by operating the NDI|HX compatible switcher.

฀@

NOTE

t Streaming may stop when the date/time is set while streaming.

Disabling the NDI|HX function

Select the [NETWORK] menu → [NDI|HX] → [CLEAR ACTIVATION].

The activation information saved to the camera is deleted.

After the activation information is deleted, the NDI|HX function cannot be used until the NDI|HX function is enabled again.

Loading ...

Panasonic AG-CX350PJ5 AG-CX350 4K Camcorder