Loading ...
Loading ...
Loading ...
– 70 –
Chapter 4 Operation — Menu settings
The items that can be set are as follows.
f [ON], [OFF]
[FRAME RATE]
Switches the shooting interval and exposure time when [VFR] is [ON].
The items that can be set are as follows.
f When the [SYSTEM] menu → [FREQUENCY] → [59.94Hz] is set
-[60fps], [54fps], [48fps], [44fps], [40fps], [36fps], [34fps], [32fps], [30fps], [28fps], [27fps], [26fps], [25fps], [24fps], [22fps], [21fps], [20fps], [18fps],
[15fps], [12fps], [9fps], [6fps], [4fps], [2fps], [1fps]
f When the [SYSTEM] menu → [FREQUENCY] → [50.00Hz] is set
-[50fps], [48fps], [45fps], [42fps], [37fps], [34fps], [32fps], [30fps], [28fps], [27fps], [26fps], [25fps], [24fps], [23fps], [22fps], [21fps], [20fps], [18fps],
[15fps], [12fps], [9fps], [6fps], [4fps], [2fps], [1fps]
[SYNC SCAN TYPE]
Switches the synchro scan display settings.
[sec] Displays in time.
[deg] Displays in the shutter aperture angle.
[SYNC SCAN]
Displays the speed of the synchro scan shutter that is used when shooting video for television etc.
The items that can be set are as follows.
f When [SYNC SCAN TYPE] is set to [sec] and the [SYSTEM] menu → [FREQUENCY] → [59.94Hz] is set
-59.94i/59.94p mode: [1/60.0] … [1/7200]
-29.97p mode: [1/30.0]…[1/7200]
-23.98p mode: [1/24.0]…[1/7200]
f When [SYNC SCAN TYPE] is set to [sec] and the [SYSTEM] menu → [FREQUENCY] → [50.00Hz] is set
-50i/50p mode: [1/50.0]…[1/7200]
-25p mode: [1/25.0]…[1/7200]
f When [SYNC SCAN TYPE] is set to [deg]
-[3.0d]…[360.0d]
[MASTER DTL]
Sets the level of the detail effect of the whole part.
The items that can be set are as follows.
f [−31]…[31]
[DTL CORING]
Sets the level of signal (including noise) that does not activate the detail effect.
The items that can be set are as follows.
f [0]…[60]
[DETAIL SETTING]
[DETAIL]
Sets [ON]/[OFF] of the detail function.
The items that can be set are as follows.
f [ON], [OFF]
[V.DTL LEVEL]
Sets the intensity of the detail level in the vertical direction.
The items that can be set are as follows.
f [−7]…[7]
[DTL FREQ.]
Sets the thickness of the detail.
The items that can be set are as follows.
f [−7]…[7]
[LEVEL DEPEND.]
When the detail of luminosity signal is emphasized, details in the darker areas are compressed.
Details of bright areas are compressed more when the value set for [LEVEL DEPEND.] is larger.
The items that can be set are as follows.
f [−7]…[7]
[KNEE APE LVL]
Sets the detail level of high luminosity areas (high-brightness areas).
Loading ...
Loading ...
Loading ...