Loading ...
Loading ...
Loading ...
Help Guide
Interchangeable Lens Digital Camera
ILME-FR7 / ILME-FR7K
Mounting Upright in a High, Fixed Location
This topic describes the procedure for mounting the unit upright in a high location using the ceiling bracket (CIB-PCM1
(option)).
To mount the unit in a high location, ask a professional contractor.
When mounting in a high location, make sure that the mounting surface and mounting material (excluding
accessories) can support 200 kg (440 lb 14.8 oz) or more, and mount the unit as described in this Help Guide. If the
mounting is not sturdy enough, the unit may fall and cause serious injury.
Attach the supplied fall prevention wire rope to the CIB-PCM1 Ceiling Bracket (option) to prevent the unit from falling.
When the unit is mounted in a high location, check that the mounting has not become loose once a year. Shorten the
inspection interval according to the usage conditions.
Installation note
To protect the lens and the lens connector block of the unit, keep the lens cap and cover on until the lens is attached.
To prevent lens failure, do not hold the lens parts while working.
To prevent unit failure, do not hold the camera head while working.
Check the high-location mounting accessories and mounting space.
CIB-PCM1 ceiling bracket kit (option)
Before you start, check that you have the following parts.
Body bracket (1)
Ceiling bracket (1)
Lens release button cover (1)
Fall prevention wire rope (1)
+PSW M3×8 screws (9)
+PSW M4x8 stainless steel screw for fall prevention wire rope (1)
Note
1
64
Loading ...
Loading ...
Loading ...