Loading ...
Loading ...
Loading ...
For details, see “Error/Warning Messages.”
When configured as a tally lamp, the lamp lights up red or green according to the external tally signal.
For details, see “Connecting a Tally Signal.”
Image sensor
Note
Do not touch directly with your hands.
3.
Lens release button
Press to remove the lens.
For details, see “Removing a Lens.”
4.
Lens signal contacts
Note
Do not touch directly with your hands.
5.
POWER lamp6.
NETWORK lamp
The state of the unit is indicated by the combination of display color and lit status (lit, blinking, not lit) of the POWER
lamp and NETWORK lamp.
7.
POWER
lamp
NETWORK
lamp
Unit status
Lit
green
*1
Lit green Power-on (network connected)
Not lit Power-on (network not connected)
Blinking
green
Not lit Power-on process in progress
Lit
orange
Not lit Power standby state
Blinking
yellow
Not lit Software update in progress
Blinking
orange
slowly
*2
Blinking
green
slowly
*2
The unit cannot operate normally. For details, view the system log. If the problem
persists even after putting the unit in standby mode or turning the power off and then on
again, contact your Sony service representative.
Blinking
orange
rapidly
*3
Blinking
green
rapidly
*3
A malfunction occurred on the unit. Contact your Sony service representative.
Blinks green when a command is received from the supplied infrared remote control.
*1
Blinking slowly: Blinking once per second
*2
Blinking rapidly: Blinking four times per second
*3
Infrared remote control sensor
Receives the control signal from the supplied infrared remote control.
8.
21
Loading ...
Loading ...
Loading ...