Loading ...
Loading ...
Loading ...
To sound the horn, push the centre pad area j1of
the steering wheel.
The front seats are warmed by built-in heaters.
The switches are located on the centre console and
can be operated independently from each other (
jA
for the left-hand side seat, jB for the right-hand side
seat).
1. Turn the ignition switch to the ON position.
NOTE
The seat heater can only be activated when
the ignition switch is in the ON position.
2. Start the engine.
3. Select the heat range:
•
Press the forward part of the switch (HI) j1
to activate the “HIGH” heat setting.
•
Press the rear part of the switch (LO) j2to
activate the “LOW” heat setting.
•
For no heat, the switch has a central “OFF”
position between “HIGH” and “LOW”.
4. The seat heater switches illuminate when either
heat setting is selected and will remain on as
long as the switch is on.
5. When the vehicle’s interior has warmed-up, or
before you leave the vehicle, be sure to turn the
seat heater system off.
CAUTION
•
Do not use the seat heater system for a long
period of time when the engine is not running,
otherwise the battery could run down.
•
Do not put anything on the seat that insulates
the heat, such as a blanket, cushion, seat
cover, etc. Otherwise, the seat may overheat.
•
Do not place anything hard or heavy on the
seat or pierce it with a pin or similar object.
This may damage the heater.
•
Any liquid spilled on a heated seat should be
removed immediately with a dry cloth.
•
When cleaning the seat, never use benzine,
thinner or any similar materials.
•
If any abnormalities are found or the heating
does not operate, turn off the switch and have
the system checked by a NISSAN dealer or
qualified workshop.
NIC2198 NIC2199
HORN SEAT HEATING (where fitted)
Instruments and controls 2-41
Loading ...
Loading ...
Loading ...