Loading ...
Loading ...
Loading ...
Operating tips
•
In order to improve the heater operation, clear
any snow and ice from the wiper blade and air
inlet in front of the windscreen.
•
After parking in the sun, drive for two or three
minutes with the windows open to vent hot air
from the passenger compartment. Then close
the windows to allow the acceleration of the air
conditioner’s cooling operation.
•
Keep the windows closed while the air condi-
tioner is operating.
•
The air conditioning system should be operated
for about 10 minutes, at least once a month. This
helps prevent damage to the system due to lack
of lubrication.
•
If the coolant temperature gauge exceeds the
“HOT” position, turn the air conditioner off. For
additional information, see “Engine overheat” in
the “6. In case of emergency” section.
•
If the engine coolant reaches an extremely high
temperature, the air conditioning system will au-
tomatically turn off. This may happen for example
if the engine runs at idle speed for a long time on
a hot day.
Quick reference charts
The following charts show the button, air intake and
dial positions for MAXIMUM AND QUICK heating,
cooling or defrosting.
NOTE
The air recirculation mode should not be selected
for either normal heating or defrosting.
m
NAA1401
HEATING
Controls Settings
j1 Fan speed control dial
Completely
clockwise
j2
Air conditioner button
(where fitted)
OFF
j3 Air recirculation button OFF
j4 Temperature control dial HOT
j5 Air flow control button
m
4-18 Display screen, heater and air conditioner, and audio system
Loading ...
Loading ...
Loading ...