Owner's Manual - Page 117

For 2014 NISSAN QASHQAI.

Loading ...
Loading ...
Loading ...
Do not push the door handle request button with
the Intelligent Key held in your hand as illustrated.
The close distance to the door handle will cause
the Intelligent Key system to have difficulty rec-
ognising that the Intelligent Key is outside the
vehicle.
After locking the doors using the door handle
request switch, make sure that the doors have
been securely locked by operating the door
handles.
To prevent the Intelligent Key from being left in-
side the vehicle, make sure you carry the key
with you and then lock the doors.
Do not pull the door handle before pushing the
door handle request button. The door will be
unlocked but will not open. Release the door
handle once and pull it again to open the door.
LOCKING/UNLOCKING
The Intelligent Key system allows you to lock and
unlock the driver’s door, passenger doors, or back
door without pressing the
or button on the
Intelligent Key or using the emergency key (driver’s
door key cylinder). When the Intelligent Key is near
the vehicle, the door locks can be locked or un-
locked by pressing the driver’s door, front passen-
ger’s door or back door request button. And the
direction indicators will flash as a confirmation.
Locking the doors
1. Make sure you have the Intelligent Key when exit-
ing the vehicle.
2. Close all doors.
3. Press any of the request buttons (front doors or
back door).
All doors and the back door will be locked.
The direction indicators flash once.
Super Lock system equipped models: The
Super Lock system will be activated
4. Pull the door handles to confirm that the doors
have been securely locked.
CAUTION
Do not leave the duplicate Intelligent Key inside
the vehicle as the locking procedure logic will
not work.
NOTE
If the Intelligent Key is left in the vehicle and the
door/back door request button is pressed, a
buzzer will sound to indicate that the Intelligent
Key is still inside the vehicle.
Unlocking the doors
For details about the anti-hijack mode (where fitted)
or the convenience mode settings , see “Switching
from Convenience mode to Anti-hijack mode (where
fitted)” earlier in this section or “[Unlocking]” in the
“2. Instruments and controls” section.
SPA2407Z
NPA1306
NPA1307
Pre-driving checks and adjustments 3-7
Loading ...
Loading ...
Loading ...