Loading ...
Loading ...
Loading ...
The following options are available in the [Stop/
Start] menu:
•
[Display]:
You can choose whether on not to display stop/
start information.
•
[Trip CO2 saving]:
The [Trip CO2 saving] and engine stop time
mode shows the CO2 saving and engine stop
time since the last reset. The CO2 saving and
engine stop time can be reset by pushing ENTER
for longer than 1 second.
•
[Total CO2 saving]:
The [Total CO2 saving] and engine stop time
mode shows:
– The estimated CO2 exhaust emissions pre-
vented.
– The engine stop time that the engine has been
stopped by the [Stop/Start] System
NOTE
The [Total CO2 saving] and engine stop
time values cannot be reset and show ac-
cumulated [Stop/Start] System informa-
tion since the vehicle was built.
[ECO Drive Report]:
You can choose whether or not to display ECO
information in the vehicle information display when
the ignition switch is placed in the ON position.
From the Main Menu Selection select [ECO Drive
Report] to display the information when the ignition
switch is placed in the ON position.
Select [Display] then On or Off to display the infor-
mation when the ignition switch is placed in the ON
position. The ECO Drive Report is displayed when
the ignition switch is in the OFF position.
You can also view the ECO drive report history.
[Welcome Effect]:
You can choose whether or not to display the wel-
come screen when the ignition switch is placed in
the ACC (where fitted) or ON position. You can
also choose the following items to define how the
welcome screen looks:
•
[Dial and pointer]
•
[Display effect]
To enable/disable the welcome screen, and set how
it appears:
1. Use the
or buttons to select [Settings], and
press ENTER.
2. Select [Welcome Effects] using the
or but-
tons and press ENTER to select this menu. Use
the or buttons to navigate between the
menu options and press ENTER to turn each
function ON or OFF.
[Vehicle settings]
Use the or switches and the ENTER button to
change the status, warnings or turn on or off any of
the systems/warnings displayed in the [Vehicle set-
tings] menu. The following menu options, each lead-
ing to a further sub-menu, are available:
•
[Lighting]
•
[Turn indicator]
•
[Unlocking]
•
[Wipers]
[Lighting]:
The [Lighting] menu has the following options:
•
[Welcome light]:
The welcome lighting can be set to be ON or
OFF. From the [Lighting] menu, select [Wel-
come Light]. Use the ENTER button to turn this
feature ON or OFF. When set to ON, front and
rear lamps will stay on for 30 seconds after un-
locking. They will also stay on for 10 seconds
after locking.
•
[Int. Lamp timer]:
The internal light timer can be set to be ON or
OFF. From the [Lighting] menu, select [Int. Lamp
timer]. Use the ENTER button to turn this feature
ON or OFF.
•
[Mood lighting]:
The mood lighting can be dimmed or brightened.
From the [Lighting] menu, select [Mood light-
ing]. Use the ENTER button and the
or
switches to adjust the brightness.
2-16 Instruments and controls
Loading ...
Loading ...
Loading ...