Loading ...
Loading ...
Loading ...
In order to use your mobile phone with the Blue-
tooth
®
of the audio system, the mobile phone must
first be setup. For details, see “BLUETOOTH®
settings” later in this section. Once it has been
setup, the hands-free mode is automatically acti-
vated on the registered mobile phone (via Blue-
tooth
®
) when it comes into range.
A notification message appears on the audio display
when the phone is connected, when an incoming
call is being received, as well as when a call is initi-
ated.
When a call is active, the audio system, microphone
(located in the ceiling in front of the rear view mir-
ror), and steering wheel switches enable hands-free
communication.
If the audio system is in use at the time, the radio,
CD, iPod, USB audio, Bluetooth audio or AUX
source mode will be muted and will stay muted until
the active call has ended.
The Bluetooth
®
system may not be able to connect
with your mobile phone for the following reasons:
•
The mobile phone is too far away from the ve-
hicle.
•
The Bluetooth
®
mode on your mobile phone has
not been activated.
•
Your mobile phone has not been paired with the
Bluetooth
®
system of the audio unit.
•
The mobile phone does not support Bluetooth
®
technology (BT Core v2.0).
NOTE
•
For models with NissanConnect (Audio with
Navigation system) see the separately pro-
vided Owner’s Manual.
•
For details, see your mobile phone’s Owner’s
Manual.
•
For assistance with your mobile phone inte-
gration, please visit your local NISSAN dealer.
j1
Phone book quick search button A-Z
j2
(Back) button
j3
Phone button
j4
<MENU> or <ENTER> button (rotate and
push to select)
BLUETOOTH® settings
Enter the phone setup menu via the (phone)
button, select the [Bluetooth] key, and then check if
the bluetooth is set to on (default setting is on, push
the <ENTER> button if not).
To setup the Bluetooth system to pair (connect or
register) your preferred mobile phone, follow the fol-
lowing procedure.
To pair a device, use the [Scan device] key or the
[Pair device] key.
Up to 5 different Bluetooth devices can be con-
nected. However, only one device can be used at a
time. If 5 different Bluetooth registered devices are
registered, a new device can only replace one of the
5 existing paired devices. Use [Del. device] key to
delete one of the existing paired devices. For de-
tails, see “BLUETOOTH® settings” later in this sec-
tion.
When successfully paired a notification message
will be displayed, then the audio system display will
return to the current audio source display. During
connection the following status icons will be dis-
played (top left of the display): Signal strength
(
), Battery status* ( ) and Bluetooth “ON”
(
).
*: If the low battery message comes on, the Blue-
tooth® device must be recharged soon.
The pairing procedure and operation may vary ac-
cording to device type and compatibility. See the
Bluetooth® owner’s manual for further details.
NOTE
•
For device details, see your audio/mobile
phone Owner’s Manual.
•
For assistance with the Bluetooth® audio/
mobile phone integration, please visit your lo-
cal NISSAN dealer.
NAA1398
4-40 Display screen, heater and air conditioner, and audio system
Loading ...
Loading ...
Loading ...