Loading ...
Loading ...
Loading ...
Anchorage location
The anchor points are located on the seatback be-
hind the rear outer seating positions and should only
be used for child restraints in the rear outer posi-
tions.
For Australia:
An additional centre anchor point (where fitted) is
located on the centre seatback.
CHILD RESTRAINT INSTALLATION
USING ISOFIX
WARNING
•
Attach ISOFIX child restraints only at the
specified locations. For the ISOFIX lower an-
chor locations, see “ISOFIX lower anchor
point locations” earlier in this section. If a child
restraint is not secured properly, your child
could be seriously injured or killed in an acci-
dent.
•
Do not install child restraints that require the
use of a top tether strap to seating positions
that do not have a top tether anchor.
•
Do not secure a child restraint in the centre
rear seating position using the ISOFIX lower
anchors. The child restraint will not be se-
cured properly.
•
Inspect the lower anchors by inserting your
fingers into the lower anchor area and feeling
to make sure there are no obstructions over
the ISOFIX anchors, such as seat belt web-
bing or seat cushion material. The child re-
straint will not be secured properly if the
ISOFIX anchors are obstructed.
•
Child restraint anchorages are designed to
withstand only those loads imposed by cor-
rectly fitted child restraints. Under no circum-
stance are they to be used for adult seat belts,
harnesses or for attaching other items or
equipment to the vehicle.
Installation on rear outer seats
Front-facing:
Be sure to follow the manufacturer’s instructions for
the proper use of your child restraint. Follow these
steps to install a front-facing child restraint on the
rear outer seats using ISOFIX:
1. Position the child restraint on the seat
j1.
2. Secure the child restraint anchor attachments to
the ISOFIX lower anchors
j2.
3. The back of the child restraint should be secured
against the vehicle seat back. If necessary, ad-
just or remove the head restraint to obtain the
correct child restraint fit. (See “Head restraints”
earlier in this section.) If the head restraint is
removed, store it in a secure place. Be sure to
install the head restraint when the child restraint
is removed. If the seating position does not have
an adjustable head restraint and it is interfering
with the proper child restraint fit, try another seat-
ing position or a different child restraint.
NPA1292
NPA1358
SSS0646AZ
Steps 1 and 2
Safety — seats, seat belts and supplemental restraint system 1-23
Loading ...
Loading ...
Loading ...