Loading ...
Loading ...
Loading ...
STARTING AND DRIVING
}}
* Option/accessory.
369
Mode Functions available
II
•
The headlights illuminate
•
Warning/indicator lights illumi-
nate for 5 seconds
•
A number of other functions will
also be activated. However, the
heated seats* and heated rear
window functions can only be
activated when the engine is run-
ning.
This mode should only be used for
very short periods to help avoid
draining the battery.
Selecting an ignition mode
Start knob in the tunnel console (generic illustration)
•
Ignition mode 0: unlock the vehicle and
keep the remote key in the passenger's com-
partment.
NOTE
To access ignition modes I or II without star-
ting the engine, the brake pedal must not be
depressed when these modes are selected.
•
Ignition mode I: Turn the start knob clock-
wise as far as possible and release it. The
knob will return automatically to its original
position.
•
Ignition mode II: Turn the start knob clock-
wise as far as possible and hold it there for
approx. 4 seconds. Release the knob.
•
Returning to ignition mode 0: To return to
mode 0 from mode II or I, turn the start knob
clockwise as far as possible and release it.
Related information
•
Starting the engine (p. 369)
•
Turning the engine off (p. 372)
Starting the engine
The engine can be started using the start knob
on the tunnel console if there is a remote key in
the passenger compartment.
Start knob in the tunnel console between the front seats
(generic illustration)
WARNING
Before starting the engine:
•
Fasten the seat belt.
•
Check that the seat, steering wheel and
mirrors are adjusted properly.
•
Make sure the brake pedal can be
depressed completely. Adjust the seat if
necessary.
Loading ...
Loading ...
Loading ...