Loading ...
Loading ...
Loading ...
LOCKS AND ALARM
* Option/accessory.
241
Erasing tailgate programming
–
Open the tailgate manually to its highest
position and press and hold the closing but-
ton on the tailgate's lower edge for at least 3
seconds. Release the tailgate.
> Two audible signals will sound to indicate
that the programmed opening angle has
been erased.
NOTE
If the tailgate has been opened and closed
continuously too long, the automatic function
will be deactivated to avoid overloading the
electrical system. The automatic function can
be used again after approximately 2 minutes.
If the vehicle's battery has been discharged or
disconnected, or if the tailgate has been open
for more than 24 hours, the tailgate must be
opened and closed once manually to reset
the system.
Pinch protection
If the tailgate is obstructed when being opened/
closed, a pinch protection mechanism is acti-
vated.
•
While opening: the tailgate will stop moving
and an audible signal will sound.
•
While closing: the tailgate will stop and
return to the currently programmed maximum
opening position. An audible signal will
sound.
WARNING
Pay attention to the risk of injury when open-
ing/ closing the tailgate. Before opening/
closing: Make sure that no one is in the path
of the tailgate as an injury could occur.
Preloaded springs
Preloaded springs for the power tailgate
WARNING
Never touch or attempt to access the preloa-
ded springs for the power tailgate. Doing so
could result in serious injury.
Related information
•
Remote key's range (p. 228)
•
Locking/unlocking from outside the vehicle
(p. 230)
•
Foot movement tailgate operation* (p. 242)
Loading ...
Loading ...
Loading ...