Loading ...
Loading ...
Loading ...
DRIVER SUPPORT
294
Deactivating/resuming Pilot Assist
Pilot Assist can be temporarily deactivated, put
in standby mode and then reactivated.
Deactivating and putting Pilot Assist in
standby mode
Function buttons and symbols (generic illustration)
–
Press the button (2).
> Pilot Assist will go into standby mode (8).
The symbol in the instrument panel
will change colors from WHITE to GRAY
and the set speed in the center of the
speedometer will change from BEIGE to
GRAY.
or
–
Press the ◀ button (3).
> Pilot Assist will be turned off and shift to
Adaptive Cruise Control in active mode.
In standby mode, the driver will have to regulate
the vehicle's speed and the distance to the vehi-
cle ahead.
When Pilot Assist is in standby mode and your
vehicle comes too close to another vehicle, the
driver will be alerted by the Distance Alert func-
tion.
WARNING
•
When Pilot Assist is in standby mode, the
driver has to steer the vehicle and regu-
late its speed and its distance to a vehicle
ahead.
•
When Pilot Assist is in standby mode, the
driver will be alerted by the Distance Alert
function if the distance to a vehicle ahead
is too short.
Standby mode due to action by the driver
Pilot Assist is temporarily deactivated and put in
standby mode if:
•
the brakes are applied
•
the gear selector is moved to N
•
the turn signals are used for more than
1 minute
•
the vehicle is driven faster than the set
speed for more than 1 minute.
A temporary increase in speed, such as when
passing another vehicle, does not affect the Pilot
Assist set speed. The vehicle will return to the set
speed when the accelerator pedal is released.
When the turn signals are used, Pilot Assist's
steering function will be temporarily deactivated.
When this is no longer the case, the steering
function will reactivate if the traffic lane's side
marker lines can still be detected.
Loading ...
Loading ...
Loading ...