Loading ...
Loading ...
Loading ...
LOADING AND STORAGE
}}
* Option/accessory.
223
Removing and storing
1. Reduce tension on the net by pressing the
button on the lower straps' respective locks
and allow some slack on both sides.
2. Press in the catches and release both of the
straps' hooks.
3. Remove the upper hooks from the ceiling
mounting points.
4. Press the red button on the upper rod to
allow it to fold.
5. Fold and roll up the net.
Store the net under the cargo compartment floor.
Related information
•
Cargo compartment cover* (p. 220)
•
Load anchoring eyelets (p. 218)
•
Steel cargo grid* (p. 223)
•
Loading (p. 216)
Steel cargo grid*
Your vehicle can be equipped with a steel grid
that helps prevent objects in the cargo compart-
ment from moving forward into the passenger
area.
WARNING
•
No one should ever be allowed to remain
in the cargo compartment when the vehi-
cle is moving.
•
The steel grid may only be used in the
rear position described in this article. The
ceiling attachment points above the front
seats are not intended to anchor the
steel grid.
•
After being mounted, be sure that the
steel grid is securely anchored in place.
Mounting
Before installing the steel grid, the existing plas-
tic ceiling mounting consoles must be replaced
by steel ones. This should preferably be done by
a trained and qualified Volvo service technician.
1. Fold down the rear seat backrests.
2. Be sure that the steel grid is turned in the
right direction. Lift the grid into the vehicle
through one of the rear doors.
3. Place the grid's attachment points in the
ceiling mounting consoles.
This is easier to do if two people hold the
grid in the correct position prior to the follow-
ing step.
Loading ...
Loading ...
Loading ...