Loading ...
Loading ...
Loading ...
||
INSTRUMENTS AND CONTROLS
140
Lighting
ring posi-
tion
Result
With the ignition in mode II or if
the engine is running:
•
In the US: the Daytime Run-
ning Lights (DRL) will be off
•
In Canada: the Daytime Run-
ning Lights will be on
•
High beam flash can be used
With the ignition in mode II or if
the engine is running:
A
•
Parking lights will be on
•
In the US: the Daytime Run-
ning Lights will be off
•
In Canada: the Daytime Run-
ning Lights will be on
•
High beam flash can be used
With the ignition in mode II or if
the engine is running:
•
The Daytime Running Lights
will be off
•
The low beam headlights will
be on
•
High Beams/High Beam
flash can be used
Lighting
ring posi-
tion
Result
With the ignition in mode II or if
the engine is running:
•
The Daytime Running Lights
will be on in daylight condi-
tions
B
•
The low beam headlights will
automatically switch on in
dark conditions
•
Tunnel detection will be acti-
vated
•
Active High Beams (AHB)
can be activated
•
High beam flash can be used
•
Continuous high beams can
be used in dark conditions
Active High Beams On/Off
A
The parking lights will be on in this position, even if the ignition
is switched off. In dark conditions, the rear parking lights illumi-
nate automatically when the tailgate is open, regardless of the
ring's position or ignition mode.
B
US models only: The use of Daytime Running Lights can be
activated/deactivated in the center display's Settings menu.
NOTE
Volvo recommends the use of Daytime Run-
ning Lights in the United States. The use of
these lights is mandatory in Canada.
Volvo recommends using the position
whenever possible.
WARNING
•
Daytime Running Lights are a driving aid
designed to help make the vehicle visible
to other roads users.
•
The driver is always responsible for
adapting the use of Daytime Running
Lights/headlights according to ambient
lighting and weather conditions.
Loading ...
Loading ...
Loading ...