Loading ...
Loading ...
Loading ...
Color Bars/Audio Reference Signal
86
Color Bars/Audio Reference Signal
You can have the camcorder generate color bars and a 1 kHz audio reference signal to calibrate an external
monitor. The color bars and audio reference signal can be output from the SDI OUT terminal (m only),
HDMI OUT terminal and × (headphone) terminal*.
* Audio reference signal only.
Recording Color Bars
You can choose between SMPTE and ARIB color bars.
1 Select [Color Bars].
> [3 # Recording Setup] > [Color Bars]
2 Touch the desired option and then touch [X].
• The selected color bars appear on the screen and will be recorded when you press the REC button.
NOTES
NOTES
• You cannot change the type of color bars while recording or when pre-recording is activated.
Recording an Audio Reference Signal
The camcorder can output a 1 kHz audio reference signal with the color bars.
1 Select [1 kHz Tone].
> [3 $ Recording Setup] > [1 kHz Tone]
2 Touch the desired option and then touch [X].
• You can select one of three audio levels (–12 dB, –18 dB, –20 dB) or select [j Off] to turn off the signal.
• The signal is output at the selected level and will be recorded when you press the REC button.
Operating modes:
Loading ...
Loading ...
Loading ...