Loading ...
Loading ...
Loading ...
117
Connecting to a Wi-Fi Network
Configuring the IP Address Settings
At this point you need to configure the TCP/IP settings. If necessary, consult the network administrator to obtain
the relevant information.
1 Touch [Automatic] or [Manual] to select the method for assigning the IP address.
• If you selected [Automatic], the IP address will be assigned automatically. Continue with the procedure to
review and save the configuration (A 117).
2 To enter the IP address, touch the [i] button next to [IP Address].
•Touch [Í] or [Î] to set the value for the first field of the address and then touch the next field to select it.
After completing the four fields of the address, touch [OK].
3 Enter the rest of the necessary TCP/IP settings in the same way.
• Camera Access Point connections: Enter the [Subnet Mask].
• Infrastructure/Ethernet connections: Enter the [Subnet Mask], [Default Gateway], [Primary DNS Server] and
[Secndry DNS Server]. If necessary, touch [Í]/[Î] to scroll up/down.
4 After completing the necessary settings, touch [OK]. Then, with the following procedure to review
and save the configuration (A 117).
Saving the Configuration
1 Review the access point’s configuration and then touch [OK].
• Drag your finger up/down or touch [Í]/[Î] to scroll and review all the information.
2 Enter a name for the new network configuration profile.
[Edit] > Enter the desired name using the keyboard screen (A 116) > [OK]
• If you wish, you can give the network configuration profile a more descriptive name to make it easier to
identify.
3 Touch [OK] to save the network configuration profile.
• If you selected a network configuration profile that contained previous settings, these will be overwritten with
the new configuration you reviewed in step 1.
4 When the confirmation message appears, touch [OK] and then touch [X].
Connecting in Infrastructure Mode
1 Select [Connection Settings].
> [B ! System Setup] > [Network Settings] > [Connection Settings]
2 Select the desired network configuration profile and then select [Infrastructure].
Network configuration profile ([1:] to [4:]) > [i] > [Edit] > [Infrastructure]
• You can save up to 4 network configuration profiles in the camcorder. If necessary, touch [Í]/[Î] to scroll
up/down.
3 Touch one of the buttons to select the desired network setup method.
• Continue the setup with the procedure corresponding to the method you wish to use (see the reference
pages below).
[WPS: Button] (A 118)
[WPS: PIN Code] (A 118)
[Search for Access Points] (A 119)
[Manual] (A 120)
Operating modes:
Loading ...
Loading ...
Loading ...