Loading ...
Loading ...
Loading ...
Menu Options
136
[É Playback Setup] menu ( mode only)
[Æ Recording Setup] menu
Menu item Setting options and additional information
[¸ Data Code] [j Off], [% Date]
[{ Data Code] [j Off], [% Date], [& Time], [ Date and Time], [{ Camera Data]
Displays the date when a clip was recorded ([¸ Data Code]) or the date and/or time when a photo
was recorded ([{ Data Code]).
Menu item Setting options and additional information
[Internal/External Rec] [v Internal Rec Priority], [ø External Rec Only (SDI)] (m only),
[ù External Rec Only (HDMI)]
(A 46,
107)
[Resolution] [3840x2160 (150 Mbps)], [1920x1080 (35 Mbps)], [1920x1080 (17 Mbps)],
[1280x720 (8 Mbps)], [1280x720 (4 Mbps)]
(A 46)
[Frame Rate] [¼ 59.94P], [» 29.97P], [º 23.98P] (A 46)
[MP4 Audio Format] [ AAC 16bit 2CH], [ LPCM 16bit 4CH] (A 77)
[Recording Media] [v Rec Media for Movies]: [6 Mem. Card A], [7 Mem. Card B]
[{ Rec Media for Photos]: [6 Mem. Card A], [7 Mem. Card B]
(A 34)
[Dual/Relay Recording] [v Standard Recording], [4 Dual Recording], [ Relay Recording]
(or [ Relay Recording])
(A 47)
[Slow & Fast Motion] [j Off], [x0.2], [x0.25], [x0.4], [x0.5], [x0.8], [x2], [x4], [x10], [x20], [x60], [x120],
[x600], [x1200]
(A 48)
[Available Space in Memory],
[Used Space in Memory]
[6] (SD card A), [7] (SD card B)
Displays a screen where you can check the total space available on the SD card and the SD card's
speed class.
In mode, the screen shows also the available space on the card and an estimate of the
remaining recording time (¸) and the remaining number of photos (ª), based on current
settings.
In mode, the screen shows also the amount of space currently used by recordings.
[Initialize 8] [6 Mem. Card A], [7 Mem. Card B] (A 34)
[External Rec Video Config.] [3840x2160 59.94P YCC420 8bit]
1
, [1920x1080 59.94P YCC422 10bit],
[3840x2160 29.97P YCC422 8bit]
1
, [1920x1080 29.97P YCC422 10bit]
(A 107)
1
Only when [Æ Recording Setup] > [Internal/External Rec] is set to [ù External Rec Only
(HDMI)].
[Rec Command] [i On], [j Off] (A 107)
[HDMI Time Code] [i On], [j Off]
When this setting is set to [i On], the HDMI signal output from the camcorder includes the
camcorder's time code.
[Time Code Mode] [ Preset], [ Regen.] (A 74)
[Time Code Running Mode] [ Rec Run], [ Free Run] (A 74)
[DF/NDF] [ DF], [ NDF] (A 75)
[Initial Time Code] Time code input screen (00:00:00:00 to 23:59:59:29) (A 74)
[User Bit Type] [ Setting], [ Time], [ Date];
when [ Setting] is selected – [i]: user bit input screen (00 00 00 00 to
FF FF FF FF).
(A 76)
[Color Bars] [j Off], [ SMPTE], [ ARIB] (A 86)
[1 kHz Tone] [ü –12 dB], [þ –18 dB], [ÿ –20 dB], [j Off] (A 86)
Loading ...
Loading ...
Loading ...