Loading ...
Loading ...
Loading ...
MAINTENANCE AND SERVICING
499
•
Replacing High Beam headlight bulbs
(p. 500)
•
Replacing low beam headlight bulbs (p. 499)
•
Replacing backup lights (p. 502)
•
Ignition modes (p. 374)
Replacing low beam headlight bulbs
On models with halogen headlights, the low
beam headlight bulb can be replaced by the
owner.
Before the bulb can be replaced, the plastic cov-
ering over the headlight housing has to be
removed, see the article "Replacing bulbs."
CAUTION
Never touch the glass of bulbs with your fin-
gers. Grease and oils from your fingers vapor-
ize in the heat and will leave a deposit on the
reflector, which will damage it.
Driver's side bulb housing shown
1. Remove the low beam round rubber cover
from the headlight housing.
2. Remove the connector from the bulb.
3. Remove the bulb by pressing it slightly
upward and then pulling it out.
4. Insert the bulb in the socket. The bulb's guid-
ing pin should point straight up.
5. Press the connector into place.
6. Put the rubber cover back into place.
Related information
•
Replacing bulbs (p. 497)
•
Bulb specifications (p. 503)
Loading ...
Loading ...
Loading ...