Loading ...
Loading ...
Loading ...
INSTRUMENTS AND CONTROLS
139
Lighting
ring posi-
tion
Result
With the ignition in mode II or if
the engine is running:
•
The Daytime Running Lights
will be on in daylight condi-
tions
B
•
The low beam headlights will
automatically switch on in
dark conditions
•
Tunnel detection will be acti-
vated
•
Active High Beams (AHB)
can be activated
•
High beam flash can be used
•
Continuous high beams can
be used in dark conditions
Active High Beams On/Off
A
The parking lights will be on in this position, even if the ignition
is switched off. In dark conditions, the rear parking lights illumi-
nate automatically when the tailgate is open, regardless of the
ring's position or ignition mode.
B
US models only: The use of Daytime Running Lights can be
activated/deactivated in the center display's Settings menu.
NOTE
Volvo recommends the use of Daytime Run-
ning Lights in the United States. The use of
these lights is mandatory in Canada.
Volvo recommends using the position
whenever possible.
WARNING
•
Daytime Running Lights are a driving aid
designed to help make the vehicle visible
to other roads users.
•
The driver is always responsible for
adapting the use of Daytime Running
Lights/headlights according to ambient
lighting and weather conditions.
Lighting panel
Instrument lighting
Thumb wheel (to the left) for adjusting display bright-
ness
Illumination of the display and instrument lights
will vary, depending on ignition mode.
The display lighting is automatically subdued in
darkness and the sensitivity is set with the thumb
wheel.
Related information
•
Daytime Running Lights (DRL) (p. 140)
•
High and low beam headlights (p. 142)
•
Ignition modes (p. 374)
Loading ...
Loading ...
Loading ...