Loading ...
Loading ...
Loading ...
||
MAINTENANCE AND SERVICING
482
WARNING
In certain models, the battery is held in place
by a strap. Ensure that this strap is always
securely fastened and pulled taut.
•
When replacing the start battery or support
battery an Absorbed Glass Mat (AGM) must
be used.
•
When replacing the start battery, a new bat-
tery with the same specifications and dimen-
sions must be used. The battery should only
be replaced by a trained and qualified Volvo
service technician.
Related information
•
Jump starting (p. 368)
•
Support battery (p. 482)
•
Battery symbols (p. 483)
Support battery
Vehicles equipped with Start/Stop are equipped
with two 12-volt batteries.
In addition to a heavy-duty start battery, models
with Start/Stop also have a support battery that
provides extra current during the Start/Stop
function's start sequence.
The support battery is located in a box next to the spring
strut in the engine compartment
The following table shows the specifications for
the support battery:
Current (V) 12
Cold start capacity (Cold
Cranking Amperes -
CCA) (A)
170
Dimensions, L×W×H in.
(mm)
5.9×3.5×5.1
(150×90×130)
Capacity (Ah) 10
•
When replacing the start battery or support
battery in a vehicle with Start/Stop, an
Absorbed Glass Mat (AGM) must be used.
•
The greater the current consumption in the
vehicle, the more the generator has to oper-
ate and the battery is charged. This increases
fuel consumption.
•
When the start battery's charge is below the
minimum permitted level, the Start/Stop
function will be disabled.
When the Start/Stop function is temporarily disa-
bled due to high current consumption:
•
The engine will auto-start, even if the brake
pedal is depressed.
The support battery does not normally required
more service than the start battery. If questions
arise, consult a Volvo retailer or trained and quali-
fied Volvo service technician.
Loading ...
Loading ...
Loading ...