Loading ...
Loading ...
Loading ...
INSTRUMENTS AND CONTROLS
}}
* Option/accessory.
103
1.
Tap
Settings in Top view.
2.
Tap
My Car Mirrors.
3.
Select
Fold Mirrors When Locking to acti-
vate/deactivate.
Resetting the mirrors' position
A mirror that has been moved manually (e.g.,
bumped into in a parking lot, etc.) has to be
returned to its normal position electrically before
automatic folding will function correctly.
1.
Fold in the mirrors with the L and R buttons.
2.
Fold out the mirrors with the L and R buttons.
The mirrors have now been reset to their original
positions.
Auto-dim*
Settings can be made for the auto-dim function
in the rearview and door mirrors.
The auto-dim function is always active while the
vehicle is being driven except when the reverse
gear has been selected. The level of sensitivity
for this function can be set to three levels, which
affect the rearview mirror and door mirrors.
NOTE
When the level of sensitivity is changed, this
change will not be noticeable immediately but
will take effect after a short period of time.
The level of sensitivity is set from the center dis-
play:
1.
Tap
Settings in Top view.
2.
Tap
My Car Mirrors.
3.
Under
Auto Dim Mirrors, select Normal,
Dark or Light.
Related information
•
Using the power seat memory function*
(p. 164)
•
Rearview mirror (p. 108)
Laminated panoramic roof*
The laminated panoramic roof is divided into two
sections and only the front section can be
opened; it can be slid horizontally to the open or
closed positions or its rear edge can be raised
and lowered to allow ventilation.
The laminated panoramic roof also has a sun
shade made of perforated fabric that is located
below the sections of glass. This shade can be
opened or closed, for example when driving in
bright sunlight.
The laminated panoramic roof also has a wind
blocker that folds up when the roof is open.
CAUTION
The optional panoramic roof should not be
opened while load carriers are installed on
the vehicle.
Loading ...
Loading ...
Loading ...