Loading ...
Loading ...
Loading ...
INSTRUMENTS AND CONTROLS
}}
105
CAUTION
The optional panoramic roof should not be
opened while load carriers are installed on
the vehicle.
Manual open (arrow points toward the rear of
the vehicle)
Auto open
Manual close
Auto close
The laminated panoramic roof and sun shade can
be operated when the ignition is in at least
mode I.
Manual operation
1.
Opening the sun shade: Pull the control
back to the first stop (the manual open posi-
tion) and hold it until the sun shade has
opened to the position of your choice.
2.
Opening the laminated panoramic roof:
Pulling the control back to the first stop (the
manual open position) and holding it a sec-
ond time will open the laminated panoramic
roof to the "comfort" position that helps
reduce wind noise while driving. Pull the con-
trol a third time to open the roof completely.
Perform this procedure in reverse order to close
the laminated panoramic roof and/or sun shade.
Movement of the laminated panoramic roof will
stop if the control is released while it is in the
manual open position.
NOTE
For manual opening, the sun shade must first
be fully open before it will be possible to open
the laminated panoramic roof. When closing,
the laminated panoramic roof must be fully
closed before the sun shade can be closed.
Automatic operation
1.
Opening the sun shade: Pull the control as
far back as possible (to the auto open posi-
tion) and release it.
2.
Opening the laminated panoramic roof:
Pull the control as far back as possible a
second time (to the auto open position) and
release it to open the laminated panoramic
roof to the "comfort" position that helps
reduce wind noise while driving. Pull the con-
trol a third time (to the auto open position)
and release it to open the roof completely.
Perform this procedure in reverse order to close
the laminated panoramic roof/sun shade. The
roof will not stop at the "comfort" position if it is
closed from the fully open position.
The laminated panoramic roof will stop when it
reaches the "comfort" position, the fully open
position or the closed position. Movement will
also stop if the control is moved in the opposite
direction to the movement of the roof.
The roof will not stop at the "comfort" position if
it is closed from the fully open position.
Loading ...
Loading ...
Loading ...