Loading ...
Loading ...
Loading ...
316
In the event of a breakdown
C4-Picasso-II_en_Chap08_en-cas-panne_ed01-2016
F Starttheengineofthevehiclewiththe
goodbatteryandleaveitrunningforafew
minutes.
F Operatethestarteronthebrokendown
vehicleandlettheenginerun.
Iftheenginedoesnotstartstraightaway,
switchofftheignitionandwaitafew
momentsbeforetryingagain.
F Waituntiltheenginereturnstoidlethen
disconnectthejumpleadcablesinthe
reverseorder.
F Refit the plastic cover to the (+) terminal, if
yourvehiclehasone.
F Allowtheenginetorunforatleast
30minutes,bydrivingorwiththevehicle
stationary, so that the battery reaches an
adequatestateofcharge.
Starting using another battery
Somefunctions,includingStop&Start,
are not available if the battery is not
sufficientlycharged.
F Raise the plastic cover on the (+) terminal,
ifyourvehiclehasone.
F Connect the red cable to the positive
terminal (+) of the flat battery A (at the metal
elbow) then to the positive terminal (+) of the
slave battery Borthebooster.
F Connectoneendofthegreenorblack
cabletothenegativeterminal(-)ofthe
slave battery B or the booster (or earth
pointontheothervehicle).
F Connecttheotherendofthegreenorblack
cable to the earth point Conthebroken
downvehicle.
Nevertrytostarttheengineby
connectingabatterycharger.
Neverusea24Vorhigherbattery
booster.
Firstcheckthattheslavebatteryhasa
nominalvoltageof12Vandacapacity
atleastequaltothatofthedischarged
battery.
The two vehicles must not be in contact
witheachother.
Switch off the electrical consumers on
both vehicles (audio system, wipers,
lighting,...).
Ensurethatthejumpleadcablesdo
notpassclosetomovingpartsofthe
engine(coolingfan,belts,...).
Do not disconnect the (+) terminal when
theengineisrunning.
Whenyourvehicle'sbatteryisdischarged,the
enginecanbestartedusingaslavebattery
(externaloronanothervehicle)andjumplead
cablesorabatterybooster.
Loading ...
Loading ...
Loading ...