Loading ...
Loading ...
Loading ...
Self-help
●
The wheel nuts should only be loosened
slightly (about one turn) before raising the
v
ehicle with the jack. Risk of accident!
●
Never apply grease or oil to wheel nuts or
to the wheel hub threads. Even if the bolts
have been tightened to the prescribed tor-
que, they could come loose while driving.
●
Never loosen the screwed joints of wheel
rims with bolted ring trims.
●
If wheel nuts are tightened below the
prescribed torque, the bolts and rims could
come loose while driving. If tightening tor-
que is too high, the wheel nuts or threads
can be damaged.
Raise the vehicle
Fig. 40
Jack position points.
Fig. 41 Cross member: positioning the jack on
the vehicle.
●
Place the jack* (vehicle tools) on firm
gr
ound. If necessary use a l
ar
ge
, str
ong
boar
d or simil
ar support. If the surface is slip-
pery (for example tiles) place the jack on a
rubber mat or similar to prevent it from slip-
ping
›››
.
●
Find the support point on the strut (sunken
ar
ea) cl
osest t
o the wheel t
o be changed
›
›
›
Fig. 40.
●
Turn the jack* crank handle, located below
the strut support point, to raise it until the
tab
1
›
›
›
Fig. 41
is bel
o
w the housing pr
ovi-
ded.
●
Align the jack* so that tab
1
“grips” onto
the housing pr
o
vided on the strut and the mo-
bil
e base
2
is resting on the ground. The
base pl
at
e
2
should fall vertically with re-
spect t
o the support point
1
.
●
Continue turning the jack* until the wheel is
slightly lift
ed off the gr
ound.
WARNING
The factory-supplied jack* is only de-
signed for changing wheels on this model.
On no account attempt to use it for lifting
heavier vehicl
es or other loads. Risk of in-
jury.
●
Make sure that the jack* remains stable.
If the surface is slippery or soft, the jack*
could slip or sink, respectively, with the re-
sultant risk of injury.
●
Only raise the vehicle with the jack* sup-
plied by the manufacturer. Other jacks,
even those approved for other SEAT mod-
els could slip, with the consequent risk of
injury.
●
Only mount the jack* on the support
points designed for this purpose on the
strut, and always align the jack correctly. If
you do not, the jack* could slip as it does
not have an adequate grip on the vehicle:
risk of injury!
●
You should never place a body limb such
as an arm or leg under a raised vehicle that
is solely supported by the jack.
●
If you have to work underneath the vehi-
cle, you must use suitable stands addition-
ally to support the vehicle, there is a risk of
accident!.
●
Never raise the vehicle if it is tilting to one
side or the engine is running.
●
Never start the engine when the vehicle is
raised. The vehicle may come loose from
the jack due to the engine vibrations.
»
47
Loading ...
Loading ...
Loading ...