Loading ...
Loading ...
Loading ...
Driving
CAUTION
For automatic switching off due to system
failures, for security reasons, the limiter is
only compl
etely switched off when the
driver stops pressing the accelerator or
consciously switches it off.
Note
●
Different versions of the instrument panel
are availabl
e and therefore the versions
and instructions on the display may vary.
●
If the cruise control (GRA), the adaptive
cruise control (ACC) or the speed limiter
are connected when the ignition is switch-
ed off, the assistants will switch it when the
ignition is switched on, but only the speed
limiter will maintain the last programmed
speed.
Operating the speed limiter with
the t
urn signal l
e
v
er
Fig. 254
On the turn signal lever: buttons to
oper
at
e the speed limit
er
.
Connecting
●
Move control
›
›
›
Fig. 254
1
to position
and pr
ess butt
on
2
.
The l
ast pr
ogr
ammed speed is st
or
ed. It does
not t
ak
e effect yet.
Activating the speed limiter
●
While driving, press button
›››
Fig. 254
3
in
the ar
ea .
The curr
ent speed is st
or
ed as the maximum
speed.
Setting the pr
ogr
ammed speed
Y
ou can set the speed using button
›››
Fig. 254
3
:
●
Briefly pr
ess ar
ea
t
o increase speed in
small increments of 1 km/h (1 mph).
●
Press and hold the area to continu-
ously increase speed in increments of 10
km/h (5 mph).
●
Briefly press area to decrease speed
in small increments of 1 km/h (1 mph).
●
Press and hold area to continuously
decrease speed in increments of 10 km/h (5
mph).
The speed is limited to the set value.
Switching off the speed limiter
●
Move control
›››
Fig. 254
1
to position .
The syst
em s
wit
ches off
.
S
wit
ching off t
emporarily
If you want to temporarily deactivate the
speed limiter, e.g. for overtaking, move the
control
›››
Fig. 254
1
to position
or
pr
ess butt
on
2
.
Aft
er o
v
ert
aking, the speed limit
er can be ac-
tiv
at
ed with the previously programmed
speed by pressing button
›››
Fig. 254
3
in
the ar
ea
.
27
2
Loading ...
Loading ...
Loading ...