Loading ...
Loading ...
Loading ...
Braking and parking
parking brake. Use the jump-start
›››
page 51.
●
When the electronic parking br
ake is ap-
plied or released, noises may be heard.
●
The system performs automatic and au-
dible tests sporadically in the parked vehi-
cle if some time elapses without the elec-
tronic parking brake being used.
Auto Hold Function
Fig. 279 Related video
Fig. 280 In the lower part of the centre con-
sol
e: Aut
o Hol
d function butt
on.
The control lamp on button
›
›
›
Fig. 280
remains on while the Auto Hold
function is connected.
Once connected, the Auto Hold function as-
sists the driver in keeping the vehicle station-
ary at repeated intervals or for a certain peri-
od of time with the engine running, for exam-
ple, when going up a slope, when stopped at
traffic lights or in heavy traffic with intermit-
tent stops.
When connected, the Auto Hold function au-
tomatically prevents the vehicle from rolling
when stationary without pressing the brake
pedal.
After detecting that the vehicle is stationary
and the brake pedal has been released, the
Auto Hold function holds the vehicle. The driv-
er can lift their foot off the brake pedal.
When the driver touches the accelerator
pedal or accelerates slightly to continue driv-
ing, the Auto Hold function releases the brake.
The vehicle moves according to the slope of
the road.
If the vehicle is stationary and one of the con-
ditions required by the Auto Hold function is
impaired, it disconnects itself and the button's
control light goes out
›››
Fig. 280. The elec-
tronic parking brake connects automatically,
if necessary, to park the vehicle safely
›››
.
Conditions for keeping the vehicle station-
ary with the Aut
o Hol
d function
●
The driv
er door must be cl
osed.
●
The driv
er
's seat belt must be f
astened.
●
The engine is running.
Switching the Auto Hold function on and
off
Pulse button
›››
. The control lamp
on the butt
on goes out when the Aut
o Hol
d
function is s
wit
ched off
.
Aut
omatically engaging and disengaging
the Auto Hold function
If the Auto Hold function was switched on with
the button before disconnecting
the ignition, the function will remain on after
the ignition is re-connected.
If the Auto Hold function was not switched on,
it will automatically remain off next time the
ignition is engaged.
The Auto Hold function connects automat-
ically if the following conditions are met
(all points must be met at the same time
›››
):
The v
ehicl
e is k
ept
st
ationary
with the
br
ake pedal on a flat surface or on a
slope.
The engine rotates “correctly”.
»
1.
2.
301
Loading ...
Loading ...
Loading ...