Loading ...
Loading ...
Loading ...
Towing bracket device*
example, it may very well be necessary to
adjust the cooling syst
em or mount thermal
pr
ot
ection pl
at
es. SEAT r
ecommends visiting
a SEAT deal
ership for this.
If a towing bracket is retrofitted, the distance
specifications should always be kept in mind.
The distance between the centre of the ball
head and the road
›››
Fig. 304
D
must never
be l
ess than indicat
ed. This al
so applies when
the v
ehicl
e is fully l
oaded, including the t
ech-
nically permissible maximum vertical load on
the coupling device.
Distance specifications
›››
Fig. 304:
Attachment points (lower part of the vehi-
cle)
1090 mm
65 mm min.
391 mm
348 mm
595 mm
1,050 mm
WARNING
If the cables are improperly or incorrectly
connected, this may lead to malfunctions
in the entire vehicle el
ectronic system, as
well as to accidents and serious injuries.
●
Never connect the trailer's electric sys-
tem to the electrical connections of the tail
lights or any other unsuitable power sour-
A
B
C
D
E
F
G
ces. Only use suitable connectors to con-
nect the trailer.
●
The towing brack
et should be retrofitted
only at a specialised workshop.
WARNING
If the towing bracket is badly fitted or un-
suit
able, the trailer may separat
e from the
vehicle while driving. This could cause seri-
ous accidents and fatal injuries.
Note
●
Only use towing brackets that have been
appro
ved by SEAT for the model in ques-
tion.
●
In some versions, the fitting of a conven-
tional towing hook solution is not recom-
mended. Please consult your Technical
Service.
341
Loading ...
Loading ...
Loading ...