Loading ...
Loading ...
Loading ...
Lights
Note
●
If the convenience turn signals are oper-
ating (three fl
ashes) and the other conven-
ience turn signals are switched on, the ac-
tive part stops flashing and only flashes
once in the new part selected.
●
The turn signal only works when the igni-
tion is switched on. The hazard warning
lights also work when the ignition is switch-
ed off.
●
If a trailer turn signal malfunctions, the
control lamp will stop flashing (trailer turn
signals) and the vehicle turn signal will
flash at double speed.
●
The main beam headlights can only be
switched on if the dipped beam headlights
are already on.
●
In cold or damp weather conditions, the
headlights, tail lights and turn signals may
mist up inside temporarily. This is normal
and in no way effects the useful life of the
vehicle lighting system.
●
The parking light does not activate auto-
matically if the left- or right-hand turn sig-
nal is left on and the ignition is disconnec-
ted.
Main beam assist (Light Assist)*
The main beam assist acts within the limits of
the syst
em and depending on envir
onment
al
and tr
affic conditions. Once s
wit
ched on, the
syst
em is activated as of a speed of about 60
km/h (37 mph) and is deactivated below
about 30 km/h (18 mph)
›››
.
When the syst
em is activ
at
ed and the cam-
er
a det
ects other v
ehicl
es that may be daz-
zled, the main beam is automatically switch-
ed off. Otherwise, the main beam is automati-
cally switched on.
The main beam assist generally detects illu-
minated areas and deactivates the main
beam when passing through a town, for ex-
ample.
Switching the main beam assist on
●
Turn on the ignition and turn the light switch
to the position .
●
From the base position, press the turn signal
and main beam headlights lever forwards
›››
Fig. 96
3
When the lamp is displ
ayed
on the instrument panel displ
ay, the main
beam assist is s
wit
ched on.
S
wit
ching the main beam assist off
●
T
urn the light switch to a position other than
›››
page 110.
●
OR: while the main beam is on, pull the turn
signal light and main beam headlights lever
forwards
›››
Fig. 96
4
.
●
OR: push the t
urn signal and main beam
headlight l
e
v
er f
orw
ar
ds to manually turn on
the main beam. The main beam assist will
then be deactivated.
Malfunctions
The following conditions may prevent the
main beam headlight control from turning off
the headlights in time or from turning off alto-
gether:
●
In poorly lit towns with highly reflective
signs.
●
Other insufficiently lit road users (such as
pedestrians or cyclists).
●
On tight bends and steep slopes (bumps)
and when oncoming vehicles are partially
obscured.
●
When the drivers of other oncoming vehi-
cles (such as a truck) can see over a guard
rail in the centre of the road.
●
If the camera is damaged or the power
supply is cut off.
●
In fog, snow and heavy rain.
●
With dust and sand turbulence.
●
With loose gravel in the field of vision of the
camera.
●
When the field of vision of the camera is
misted up, dirty or covered by stickers, snow,
ice, etc.
»
113
Loading ...
Loading ...
Loading ...