Loading ...
Loading ...
Loading ...
Driver assistance systems
Connecting and activating the ACC
T
o connect and activ
at
e the ACC, the posi-
tion of the gearbo
x l
e
v
er, the vehicle speed
and the position of the third level of the ACC
must all be taken into account.
●
With manual transmission, the gear lever
must be in any gear except first. With auto-
matic transmission, the gear lever must be in
position D or S. Speed must be higher than
30 km/h (18 mph) approx.
●
To activate the ACC, move the third lever to
position
›››
Fig. 265
1
. At this time, the
ACC is not activ
e and ther
e is no pr
ogr
am-
med speed.
●
Ne
xt, pr
ess butt
on
›››
Fig. 266
B
or
mo
v
e the l
e
v
er t
o position
›››
Fig. 265
2
. At this moment the ACC is ac-
tiv
at
ed and the curr
ent speed and dist
ance
ar
e pr
ogr
ammed. The picture in the box will
change to Active mode
›››
Fig. 263 .
While ACC is active, the vehicle travels at a
set speed and distance from the vehicle
ahead. Both speed and distance can be
changed at any time.
Setting speed
●
To set the speed, move the third lever up
+
or down
–
to the desired speed
›
›
›
Fig. 263
6
. The speed adjustment is
made at 10 km/h (6 mph) int
erv
al
s.
●
If you wish t
o incr
ease speed by int
erv
als of
1 km/h (0.6 mph), move the lever to position
›››
Fig. 265
2
, or to decrease it press
butt
on
›
›
›
Fig. 266
B
.
The set speed can be changed when the v
e-
hicl
e is st
opped or during driving.
Setting your dist
ance l
e
v
el
●
To increase or reduce the distance, press
button
A
to the right or left
›
›
›
Fig. 266
.
The instrument panel displ
ay modifies the se-
l
ect
ed distance
›››
Fig. 263
4
. There are 5
dist
ance l
e
v
el
s t
o choose fr
om. SEAT recom-
mends level 3. The set distance can be
changed when the vehicle is stopped or while
driving
›››
.
Disconnecting and deactiv
ating the ACC
●
T
o disconnect the ACC mo
v
e the l
e
v
er to
position (fixed)
›››
Fig. 265
0
. An ACC de-
activated message appears and the func-
tion is t
ot
ally deactiv
at
ed.
If you do not wish t
o disconnect the ACC, just
t
o s
witch it temporarily to inactive mode
(Standby), move the third lever to position
3
or press the brake pedal.
It will al
so s
wit
ch t
o inactiv
e mode (St
andby)
if the v
ehicle is stopped and the driver door is
opened.
Adjusting the default distance level at the
start of your journey
In wet road conditions, you should always set
a larger distance with regard to the vehicle in
front than when driving in dry conditions
›››
.
In the Easy Connect syst
em, you can pr
e-se-
l
ect the dist
ance l
e
v
el when connecting the
ACC to: Very short, Short, Medium, Long and
Very long using button > SETTINGS >
Driver assistance
›››
page 82.
Changing the driving profile
In vehicles with SEAT Drive Profile, the driving
profile selected can have an influence on the
ACC’s acceleration and braking behaviour
›››
page 263.
In vehicles without SEAT Drive Profile, the be-
haviour of the ACC can also be affected if
any of the following drive profiles are selec-
ted in the Easy Connect system:
●
Normal
●
Sport
●
Eco
●
Convenience
In this case you must access the ACC set-
tings using button > SETTINGS > Driver
assistance > ACC
›››
page 82.
»
281
Loading ...
Loading ...
Loading ...