Loading ...
Loading ...
Loading ...
Air conditioning
●
Always keep the remote control, k
eyrings
with batteries, the spare batteries, button
batteries and all other batteries over 20
mm out of reach of children.
●
If you suspect that someone may have
swallowed a battery, seek immediate med-
ical attention.
CAUTION
●
The r
adio frequency remote control con-
tains el
ectronic components. Therefore,
avoid getting it wet and exposing it to
knocks or direct sunlight.
●
The use of inappropriate batteries may
damage the radio frequency remote con-
trol. For this reason, always replace the
used battery with another of the same volt-
age, size and specifications.
For the sake of the environment
●
Please dispose of your used batteries
correctly and with respect for the environ-
ment.
●
The r
emote control battery may contain
perchlorate. Observe the legal provisions
regarding disposal.
●
Care should be taken so as not to oper-
ate the remote control unintentionally so
as to prevent the auxiliary heater being
switched on accidentally.
Programming the auxiliary heater*
Before programming it, check that the vehi-
cle's date and time are set correctly
››
›
.
The auxiliary heater is programmed in the
Auxiliary heater menu of the infotainment
system.
Open the
Auxiliary heater menu.
●
Press the button of the Climatronic
control panel.
●
Press the function button.
Function button: function
Switch off: The auxiliary heater is immediately
switched off.
Heat, Ventilate: Set t
o heat or ventilate the vehi-
cle int
erior when the auxiliary heater is switched on.
Press the function button to select the desired
mode.
Set: Opens the Auxiliary heater menu.
Function button: function
Departure time 1, Departure time
2, Departure time 3: Three different de-
parture times (hh.mm) may be progr
ammed. If
the auxiliary heater should only be switched
on a certain day of the week, this can also be
selected.
Duration: The duration determines the oper-
ating time of the auxiliary heater when switch-
ed on using the f
ast heating button on the
air conditioning controls. The duration is also
used to calculate the departure time for the
manual air conditioner. It can be set between
10 and 60 minutes at 10-minute intervals.
The programmed departure time determines
the appr
o
ximat
e time it shoul
d t
ak
e t
o reach
the temperature set in the vehicle. The start of
the heating operation is determined automat-
ically depending on the outside temperature.
Checking the programming
When a departure time is activated and the
ignition is switched off the control lamp of the
fast heating button lights up for approxi-
mately 10 seconds.
WARNING
Never programme the auxiliary heater so
that it switches itself on and is running in an
enclosed space or an area with no ventila-
tion. The auxiliary heat
er exhaust fumes
contain carbon monoxide, an odourless
and colourless toxic gas. Carbon monoxide
»
163
Loading ...
Loading ...
Loading ...