Loading ...
Loading ...
Loading ...
1
Before You Start
Introduction
Before You Start1
Introduction1.1
The Fluke Calibration 9102S Mid-Range Field Calibrator is a small portable instru-
ment designed for quick on-site checks and calibration of thermocouple and RTD
temperature probes. This instrument is small enough to use in the eld, and accurate
enough to use in the lab. Calibrations may be done over a range of –10°C to 122°C
(14°F to 252°F). Temperature display and setpoint resolution are 0.1 degrees.
The instrument features:
A controlled temperature block with two calibration insert sleeves
●●
Rapid heating and cooling
●●
Prop stand
●●
Handle strap
●●
RS-232 interface capability
●●
+12 Volt DC battery option
●●
Built in programmable features include:
Temperature scan rate control
●●
Eight set-point memory
●●
Adjustable readout in °C or °F
●●
The temperature is accurately controlled by Fluke’s digital controller. The control-
ler uses a precision platinum RTD as a sensor and controls the well temperature with
transistor driven thermoelectric devices.
The LED front panel shows the current well temperature. The temperature may be set,
using the control buttons, to any desired temperature within the instrument’s range.
Multiple fault protection devices insure user and instrument safety and protection.
This dry-well calibrator was designed for portability, low cost, and ease of operation.
Through proper use and maintenance, the instrument will provide continued accurate
calibration of temperature sensors and devices. The user should be familiar with the
safety guidelines and operating procedures of the calibrator as described in the instruc-
tion manual.
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...