FLUKE 9102S/725-KIT User Manual for the Fluke 9102S/725-KIT Lo-Temp Dry-Well and Process Calibrator Kit

Loading ...

9102S Dry-Well Calibrator

Serial Interface Parameters

Baud Rate6.11.1

The baud rate is the rst parameter in the menu. The baud rate setting determines the

serial communications transmission rate.

The baud rate parameter is indicated by,

bAUd FlashesbAUdforonesecondandthendisplaysthesetting

2400b Currentbaudrate

The BAUD rate of the serial communications may be programmed to 300, 600, 1200,

2400 (default), 4800, or 9600 BAUD. Use the up or down arrows to change the BAUD

rate value.

4800 b Newbaudrate

Press “SET” to accept the new setting or “EXIT” to abort the operation and skip to the

next parameter in the menu.

Sample Period6.11.2

The sample period is the next parameter in the serial interface parameter menu. The

sample period is the time period in seconds between temperature measurements trans-

mitted from the serial interface. If the sample rate is set to 5, the instrument transmits

the current measurement over the serial interface approximately every ve seconds.

The automatic sampling is disabled with a sample period of 0. The sample period is

indicated by,

SPEr Flashesforonesecondandthentheserialsampleperiod

setting is displayed

1 Current sample period (seconds)

Adjust the value by using the up or down arrows (u d).

60 New sample period

Press “SET” to accept the new setting or “EXIT” to abort the operation and skip to the

next parameter in the menu.

Duplex Mode6.11.3

The next parameter is the duplex mode. The duplex mode may be set to full duplex or

half duplex. With full duplex any commands received by the calibrator via the serial

interface are immediately echoed or transmitted back to the device of origin. With half

duplex the commands are executed but not echoed. The duplex mode parameter is

indicated by,

dUPL Flashesforonesecondandthentheserialduplexmode

setting is displayed

1.888.610.7664 sales@GlobalTestSupply.com

Fluke-Direct.com

Loading ...

FLUKE 9102S/725-KIT Lo-Temp Dry-Well and Process Calibrator Kit