FLUKE 9102S/725-KIT User Manual for the Fluke 9102S/725-KIT Lo-Temp Dry-Well and Process Calibrator Kit

Loading ...

Controller Operation

Calibration Parameters

FULL Currentduplexmodesetting

The mode may be changed using the up or down arrows (u d).

HALF Newduplexmodesetting

Press “SET” to accept the new setting or “EXIT” to abort the operation and skip to the

next parameter in the menu.

Linefeed6.11.4

The nal parameter in the serial interface menu is the linefeed mode. This parameter

enables (on) or disables (off) transmission of a linefeed character (LF, ASCII 10) after

transmission of any carriage-return. The linefeed parameter is indicated by,

LF Flashesforonesecondandthentheseriallinefeedsetting

is displayed

On Currentlinefeedsetting

The mode may be changed using the up or down arrows (u d).

OFF Newlinefeedsetting

Press “SET” to accept the new setting or “EXIT” to abort the operation and skip to the

next parameter in the menu.

6.12 Calibration Parameters

The operator of the instrument controller has access to a number of the calibration

constants: R0, ALPHA, and DELTA. These values are set at the factory and must

not be altered. The correct values are important to the accuracy and proper and safe

operation of the instrument. Access to these parameters is available to the user so that

in the event that the controller memory fails the user may restore these values to the

factory settings. The user should have a list of these constants and their settings with

the instrument manual.

CAUTION: DO NOT change the values of the instrument calibration constants

from the factory set values. The correct setting of these parameters is important

to the safety, proper operation, and performance of the instrument.

The calibration parameters menu is indicated by,

CAL Calibrationparametersmenu

Press “SET” ve times to enter the menu. The calibration parameters menu con-

tains the parameters, Hard Cutout, R0, ALPHA, and DELTA, which characterize the

resistance-temperature relationship of the platinum control sensor. These parameters

may be adjusted to improve the accuracy of the calibrator.

1.888.610.7664 sales@GlobalTestSupply.com

Fluke-Direct.com

Loading ...

FLUKE 9102S/725-KIT Lo-Temp Dry-Well and Process Calibrator Kit