FLUKE 9102S/725-KIT User Manual for the Fluke 9102S/725-KIT Lo-Temp Dry-Well and Process Calibrator Kit

Loading ...

Controller Operation

Serial Interface Parameters

parameters, serial interface parameters, and calibration parameters. The menus are

selected using the up and down arrows and then pressing “SET”.

6.9 Operating Parameters

The operating parameters menu is indicated by,

PAr Operatingparametersmenu

The operating parameters menu contains the High Limit parameter.

6.10 High Limit

The High Limit parameter adjusts the upper set-point temperature. The factory default

and maximum are set to 375°C (707°F). The minimum setting is 125°C (257°F). For

safety, a user can adjust the High Limit down so the maximum temperature set-point is

restricted.

HL FlashesHLandthendisplaysthesetting

375 Flashesthecurrentvalueandthendisplaysthevaluefor

adjustment

375 CurrentHighLimitsetting

Press the u or d to adjust the setting.

300 NewHighLimitsetting

To accept the new setting, press “SET”. Press “EXIT” to continue without storing the

new value.

 AcceptthenewHighLimitsetting

6.11 Serial Interface Parameters

The serial RS-232 interface parameters menu is indicated by,

SErL SerialRS-232interfaceparametersmenu

Press “SET” to enter the menu. The serial interface parameters menu contains

parameters which determine the operation of the serial interface. The parameters in the

menu are — baud rate, sample period, duplex mode, and linefeed.

6.11.1 Baud Rate

The baud rate is the rst parameter in the menu. The baud rate setting determines the

serial communications transmission rate.

The baud rate parameter is indicated by,

1.888.610.7664 sales@GlobalTestSupply.com

Fluke-Direct.com

Loading ...

FLUKE 9102S/725-KIT Lo-Temp Dry-Well and Process Calibrator Kit