Loading ...
Loading ...
Loading ...
Before using for the first time
29
Standard settings
The following settings must be made
before starting up for the first time. You
can change these settings again at a
later time (see “Settings”).
Risk of injury caused by hot
surfaces.
The oven gets hot during operation.
For safety reasons, the oven may
only be used after it has been fully
installed.
The oven will switch on automatically
when it is connected to the electricity
supply. "Miele" will appear in the
display and after a few seconds you
will be prompted to set the language.
Setting the language
Use the rotary selector to select
the required language.
Confirm with OK.
If you have accidentally selected a
language that you don't understand,
proceed as described in "Settings –
Language ".
Setting the location
Use the rotary selector to select
the required location.
Confirm with OK.
Setting up Miele@home
Set up “Miele@home” appears in the
display.
To set up Miele@home immediately,
confirm by touchingOK.
To set it up at a later date, selectSkip
with the rotary selector and confirm
withOK.
See "Settings – Miele@home" for
information on setting up at a later
date.
To set up Miele@home immediately,
select the desired connection
method.
You will then be guided by the display
and the Miele App.
Setting the time of day
Set the time of day with the rotary
selector in hours and minutes.
Confirm with OK.
Completing the initial commissioning
process
Set-up successfully completed appears in
the display.
Confirm with OK.
Language appears in the display.
Select the sensor.
The time of day appears.
The appliance is now ready for use.
Loading ...
Loading ...
Loading ...