Loading ...
Loading ...
Loading ...
Chapter 19 System Utility Function Setting RIGOL
DS8000-R User Guide 19-15
Click Operation to select "Save Image".
âš« Image Format
Click Format to select the image format. The image formats include "*.png",
"*.bmp", "*.jpg", and "*.tif".
âš« Invert
Click Invert continuously to enable or disable the invert function.
âš« Color
Click Color continuously to set the color of the saved image to "Color" or
"Gray".
2. Waveform Saving
When the Quick shortcut key is set to "Save Wave", click Quick at the right
section of the operation interface in the Web Control page to save the waveform.
âš« Operation Type
Click Operation to select "Save Wave".
âš« Data Source
Click Data Source continuously to select "Memory" or "Screen" as the
source of the saved waveform.
âš« Format
Click Format to select the waveform format. When Data Source is "Screen",
the available formats are "*.bin" and "*.csv". When Data Source is "Memory",
the available formats are "*.bin", "*.csv", and "*wfm".
âš« Storage Channel
If "Memory" is selected under Data Source, you need to set the storage
channel. Click Channel to select the storage channel. The available storage
channels include CH1-CH4.
3. Setup Saving
When the Quick shortcut key is set to "Save Setup", click Quick at the right
section of the operation interface in the Web Control page to save the setup of
the oscilloscope.
Click Operation to select "Save Setup".
4. All Measurement
When the Quick shortcut key is set to "All Measure", click Quick at the right
section of the operation interface in the Web Control page to measure all the
parameters of the current measurement source.
Loading ...
Loading ...
Loading ...