Loading ...
Loading ...
Loading ...
Chapter 18 Store and Load RIGOL
DS8000-R User Guide 18-5
folder. For details, refer to descriptions in "To Create a Folder".
5) Click File Name to name the setup file for storage. For details, refer to
descriptions in "To Create a Folder". Click Storage → More → Auto
Name to select "ON", then the filename is generated automatically. If the
filename that you input is the same as the existing filename, a prompt
message will be displayed, reminding you that the existing file will be
overwritten and asking you whether to continue or not.
6) Click Save to save the set setup file to the selected folder in "*stp" format.
Tip
⚫ After saving the reference waveform, click Ref → More → Export to enter
the disk management interface of reference waveform file storage.
⚫ Click Utility → PassFail to enable the pass/fail test function. Then click
Mask → Save to enter the disk management interface of pass/fail test mask
file storage.
2. Load the Setup File from the Internal Memory (Take Load Setup as an
Example)
1) Click Storage → Load Setup to enter the setup load interface. The disk
management interface is displayed automatically. By default, "Local Disk(C)"
is selected.
2) Click to enter the internal memory storage interface.
3) Select the desired storage location. Clicking
can go to the previous
location.
4) Select the file to be loaded (the default file type is in "*stp" format). Then,
the Load menu is enabled. Click Load to load the selected file.
Tip
⚫ Click Ref → More → Import to enter the disk management interface of
reference waveform file load.
⚫ Click Utility → PassFail to enable the pass/fail test function. Then click
Mask → Load to enter the disk management interface of pass/fail test mask
file load.
Loading ...
Loading ...
Loading ...