Loading ...
Loading ...
Loading ...
Chapter 7 Digital Voltmeter (DVM) and Frequency Counter RIGOL
DS8000-R User Guide 7-5
To Set Resolution
For Period and Frequency measurements, you need to set the readout resolution.
Click Resolution, then use the pop-up numeric keypad or scroll with the mouse to
set the resolution. The range of resolution is from 3 bits to 6 bits. By default, it is 5
bits.
Note: The greater the resolution, the longer the gate time. In this way, the
measurement time will be longer.
To Clear Count
When "Totalize" is selected under Measure, the oscilloscope measures the count of
edge events on the signal. At this time, click Clear Count to clear the measurement
results.
To Enable or Disable the Statistical Function
For Period and Frequency measurements, enable the frequency counter statistical
function. Click Statistic continuously to enable or disable the statistical function.
When enabled, the maximum value and minimum value will be displayed in the
frequency counter data, as shown in the following figure.
Statistics
Loading ...
Loading ...
Loading ...