Loading ...
Loading ...
Loading ...
Chapter 18 Store and Load RIGOL
DS8000-R User Guide 18-9
2. Clear the Name Input Area
If there is no character in the "Name Input Area", please go to Step 3. If there
are characters in the "Name Input Area", click the Delete key
to delete all
the characters in the name input area in order.
3. Input the First Character "F"
1) If the current setting is uppercase input, please go to Step 2). If the current
setting is lowercase input, click "Caps" to switch to the uppercase input.
2) Click to select "F". The character is displayed in the name input area.
4. Input the Other Characters
Use the same method to input the remaining letters "ilename" by referring to
Step 3. Pay attention to the upper-lower case of the letters when inputting them.
5. Modify or Delete the Unwanted Characters that Have Been Entered.
While entering a filename, you can modify or delete the unwanted character if
necessary. To delete the input characters, select and click the delete key
in
the virtual keypad. To modify the input characters, delete the unwanted
characters and input the desired characters again. If the character to be
modified is in the middle, click the delete key
to delete the characters
starting from the last one to the character to be modified, then input the new
character again.
You can also directly move the cursor to the character required to be modified or
deleted, and then input the desired character again or delete the unwanted
character.
6. After finishing the input, click OK. The oscilloscope will create a folder or a
specified type of file with this name under the current directory.
Simplified Chinese (or Traditional Chinese) Input Method
For example, create a folder with the name "文件名". Note that the input method of
traditional Chinese is the same as that of the simplified Chinese.
Loading ...
Loading ...
Loading ...