Loading ...
Loading ...
Loading ...
Remote Commands
Command Summary by Function
5
5-3
Output Commands
Command Desc ription
FUNC? Returns the present output, measurement, or calibration function.
OPER Activates the Calibrator output if it is in standby.
OPER? Returns the operate/standby setting.
OUT Sets the output of the Calibrator.
OUT? Returns the output amplitude of the Calibrator.
RANGE? Returns the present output range. (Voltage only).
RANGELCK Locks the present output range (Voltage only).
RANGELCK? Returns the RANGELOCK state (Voltage only).
STBY Deactivates the Calibrator output if it is in Operate mode.
Measurement Commands
Command Desc ription
PRES? Queries the attached pressure module for its model and serial number.
PRES_MEAS Changes the operating mode to pressure measurement.
RTD_MEAS Changes the operating mode to RTD measurement.
TC_MEAS Changes the operating mode to thermocouple measurement.
VAL? Returns the last resistance, temperature, or pressure measurement value.
ZERO_MEAS Zeros the pressure module.
ZERO_MEAS? Returns the zero offset for the pressure module.
RS-232 Port Commands
Command Desc ription
LOCAL Puts the Calibrator into the local state and disables lockout.
LOCKOUT Puts the Calibrator into the lockout state. This command duplicates the
IEEE-488 LLO (Local Lockout) message.
REMOTE Puts the Calibrator into the remote state. This command duplicates the
IEEE-488 REN (Remote Enable) message.
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...