Loading ...
Loading ...
Loading ...
525B
Users Manual
2-4
Simulating Custom RTD Coefficients
The USR_DEF RTD type allows the Calibrator to simulate a custom curve-fit
RTD.
To enter the coefficients for a custom RTD:
1. Press to select RTD mode.
2. Press until you get the
USR_DEF display.
3. Press to enter custom RTD information.
RTD CUSTOM (1-5) appears on
the Calibrator display. You can store up to five custom RTD definitions on the
Calibrator.
4. Press a number key to specify the RTD you want to define (1-5). You can
press to step through definitions without changing the values.
5. When the
SET/RECALL display appears, press to define a custom RTD
coefficient.
6. Enter the
MIN TEMP and press .
7. Enter the
MAX TEMP and press .
8. Enter the nominal resistance (R
0
) and press .
9. Enter the temperature coefficients and press . Press to enter a
positive or negative exponent for the coefficient.
To use a custom RTD:
1. Press to enter RTD mode.
2. Press until you get the
USR_DEF display.
3. Press to use custom RTD information.
RTD CUSTOM (1-5) appears on the
Calibrator display. You can store up to five custom RTD definitions on the
Calibrator.
4. Press a number key to select the RTD you want to use (1-5).
5. When the
SET/RECALL display appears, press to recall and use the
selected RTD.
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...